Waterbased Epoxy Resin Waterbond SR 1900 + Hardener SD 1905

The water based resin SICOMIN WATERBOND is a water based multi-purpose epoxy resin, used as much in construction, boat building as in DIY.
This system is used as a primer, as a mortar binder, or a porous surface fixer.
Can be used on wood, concrete, fabrics, paper…
it can also be used as a varnish, left as it is for inside use or protected by a coating for outside use.
Can be diluted with water to reduce the viscosity of the system, it penetrates the support and fixes whilst staying microporous.
This product is simple to use, applied by roller, paintbrush, sponge, spray or low-pressure gun.
It has a milky consistency during application, but transforms into a clear, hard, waterproof and transparent layer when dry.
Une fois dilué à l'eau, ce système est très économique.
Once diluted with water, this system is very economical. Can be used on a slightly damp support with good ventilation.

APPLICATIONS:

- Wood varnish
- Blocking of dusty cemented surfaces (garages)
- Pottery, Terracotta
- Waterproofing, recovery of porosity in basins, tiled swimming pools, glass paste, artistic work on boxes, papers, fabrics…
- Bonding primer for classic epoxy resins.
- Fixing of roofs in fibro-cement

INSTRUCTION GUIDE:

• Mixing ratio per weight: 1 / 1
• Mixing ratio per volume: 1 / 1
• Dilute with water
• Wash equipment with water
   

AVAILABLE KITS:

• 2 Kg of mix (resin 1 Kg + hardener 1 Kg)
• 10 Kg of mix (resin 5 Kg + hardener 5 Kg)

For sizes of kits that cannot be delivered to parcelshop, please contact our commercial service.